Product Details ＋

Overview

Ronseal All Weather Protection Masonry protects against all weather conditions whilst maintaining a strong colour. It’s waterproof and protective coating won’t crack or peel and it’s showerproof in as little as 30 minutes. It also comes with a 15 year guarantee so you can be confident your masonry will stay looking good for longer.

Protection against UV and all weather conditions
Guaranteed to last 15 years
7 colours available

Area	Exterior
Recommended Use	Use on Brick, concrete, cement, fibre cement board, stone (vertical only), previously painted masonry surfaces, pebbledash stucco, roughcast rendering
Base	Water-Based
Coverage	10m² per litre
Drying Time	30 Minutes
Re-Coat Time	4 Hours
Recommended Coats	2 Coats
Application Method	Brush or Roller

Preparation

Always ensure the surface to be treated is clean, dry and free from any dust, algae, fungi or moss.

With a stiff brush and a fungicidal cleaner such as remove any dirt, chalk or grime.
Remove any flaking or damaged paint.
If the surface is powdery use

Application

Before applying stir the product thoroughly and test a small area to ensure colour and adhesion.

Apply only in dry conditions, above 10°C and when bad or humid weather conditions are forecast and avoid direct sunlight.
Ensure the paint is thoroughly stirred.
If use more than one tin we recommend to mix them together to avoid any variations.
Do not thin.
Using a masonry brush or roller apply a generous amount of paint.
Avoid excess rolling or brushing.
Leave 4 hours between coats.
We recommend at least 2 coats for the best finish and durability.
For a strong colour change more coats may be necessary.
Depending on the weather conditions the paint may dry slower therefore it will take longer for the surface to become water resistant.
If you have any spillages when painting, just clean them up with a wet cloth before the paint dries.